DM-Ⅲ打磨性測定儀是用于評價底漆、膩子打磨性優劣的裝置。本裝置對待測定的底漆、膩子試樣進行來回打磨，打磨次數可由計數器直接讀取，根據負荷重量、打磨次數與磨損程度，可評定該底漆、膩子耐打磨的性能。本儀器采用磁性吸盤，試樣裝卸方便。 主要技術參數1.磨擦速度：        0-135次/分（單程）2.置數范圍：        0-9999（雙程計數）注：顯示次´2為打磨次數3.荷重：            打磨頭：570±15g 附加砝碼：50g 100g 200g4.電源：            220V  50Hz5.功率：            60W6.外形尺寸：        300mm´280mm´380 mm（長´寬´高）7.整機重量：        25KgDM-ⅢSanding Property TesterSanding Property Tester is applicable to evaluate sanding performance of primer coat and putty. This instrument carries out back and forth sanding for preparing measured primer coat and putty. Sanding times can be directly read by counter.. According to load weight, sanding times and abrasive degree, it can be used to evaluate sanding resistance performance of primer and putty. This instrument adopts magnetic suction pad, for easily handling specimen.Main Technical Parameters1. Abrasive speed: 0-135 times/min (single pass)2. Range of setting value: 0-9999 (counting by double pass) Note: displaying number times two is sanding number.3. Load weight: grinding tool 570±15g  Additional weight: 50g 100g 200g4. Electrical source: 220V 50Hz5. Power: 60W6. Overall dimension: 300mm´280mm´380mm（length by width by height）7. Weight: 25kg 上海現代環境工程技術有限公司 公司地址：上海市昭化路508號新衡公寓405室  電話：  傳真：  郵編：200050廠   址：上海市青浦區徐涇鎮徐旺路18號     電話：  傳真：  郵編：201702 以上是打磨性測定儀，涂料檢測儀器的詳細信息，如果您對打磨性測定儀，涂料檢測儀器的價格、廠家、型號、圖片有什么疑問，請聯系我們獲取打磨性測定儀，涂料檢測儀器的新信息。